117
4 Adjusting knitting machine
4.1 Basic settings
4.1.6 Adjusting knitting areas
In the Sintral program up to four knitting areas (SEN areas) can be defined
and switched on and off separately. If the knitting areas are not defined in
the Sintral program, they can be adjusted in the "Knitting areas" window.
1. Call up the "Knitting areas" window.
"Knitting areas" window
2. Assign each knitting area ("SEN") a needle area.
3. Confirm entries.
The assigned areas are graphically shown.
4. To switch individual knitting areas on or off, tap the switch in the
"Selection (manual)" column.
5. Call up "Main menu".
Key Function
Call up "Knitting areas" window
Confirm entries
Call up "Main menu"
Keys for adjusting the knitting areas
To Next Page
Loading...
