Adjusting knitting machine 4
Advanced adjustments 4.2
158
4.2.7 Copying service data
With this menu the service data can be copied on a data carrier.
"Copy service data" window
Label Explanation
Copy Logfiles If the machine computer has serious problems, e.g.. . it does
not react to any entries or the program crashes any longer, the
cause is very important for Stoll. The computer saves the data
up to the fault internally in so-called "Logfiles". These files can
be saved and sent to the Stoll helpline so that Stoll can carry out
an exact error diagnostics.
Copy Dongle The machine settings do not only contain the machine data, but
also the machine options, the machine configuration, the report
and other internal control information. It is important to back up
the data, e.g. when the hard disk is replaced.
Copy Print For the Stoll technician only
Copy Report The operating data are saved with the STOLL machine number.
Copy Mc The machine data include the machine-specific settings
(correction values). The data will be saved in a zip-file.
When the knitting machine was shipped, the machine data was
printed out and put on the right control cabinet.
Machine data sheet at the right control cabinet
Keys in the "Copy service data" window
To Next Page
Loading...
