147
4 Adjusting knitting machine
4.2 Advanced adjustments
4.2.1 Switching on and off aggregates *
"Machine settings" window
Key Function
Call up the "Machine settings" window.
Keys for calling up the "Machine settings" window
Explanation
1 Switch on or off lighting in machine area
2 Switching right or left feed wheel on or off.
If the feed wheel is not required, we recommend switching it off. This saves
energy.
3 Switch fluff absorption on or off.
The needle beds in the knitting area are vacuumed off with the fluff absorption
automatically. This does not interrupt ongoing knitting process. We
recommend switching on the fluff absorption permanently.
The settings for the fluff absorption always remain saved, even when the
operating system is loaded again.
interval Periodic switch on and off of the suction device.
After n courses: Number of courses without suction (1
course = 2 rows)
For n courses: Number of courses with suction
Stroke "optimised": The cleaning row is carried out only in SEN
area.
"maximum": The cleaning row is carried out over the
entire needle bed.
To Next Page
Loading...
