Repairing the knitting machine 7
Entering the data of the needle selection displacement manually 7.7
360
Concluding activities The data of the needle selection displacement is part of the machine
settings. It is automatically saved in the dongle data.
You can save this data additionally if necessary:
– on a USB memory stick
– note on the machine data sheet at the right control cabinet
7.7 Entering the data of the needle selection
displacement manually
If the data for the needle selection displacement got lost and there is no
Dongle data available, the data can be entered manually.
When the knitting machine was shipped, the machine data was printed out
and put on the right control cabinet.
Machine data sheet at the right control cabinet
Only for Stoll technicians or knitting technicians
Key Function
Call up the "Service" menu
Call up the "Basic settings" menu
Open the "Needle bed parameters" window
Keys for controlling the data for the needle selection displacement
To Next Page
Loading...
