Stoll CMS ADF-3 - Lubricate Knitting Machine

285
6 Maintenance of the knitting machine
6.3 Lubricate knitting machine
6.3 Lubricate knitting machine
This chapter contains information on:
 Lubrication interval [-> 286]
 Setting lubricating interval for needle bed [-> 287]
 Oil needle bed [-> 288]
 Restarting lubricating interval [-> 289]
 Oiling jack bed [-> 289]
 Oiling the control of the holding-down jacks [-> 289]
 Oiling the wires in the yarn carrier rail [-> 290]
 Greasing impulse sensor rails [-> 291]
 Greasing butts of the coupling parts and intermediate sliders [-> 292]
 Greasing the yarn carrier bows [-> 292]
 Greasing the linear guidance [-> 293]
 Greasing racking device [-> 294]
 Grease needle bed support/adjustment pieces [-> 295]