425
10 Machine Management Tools
10.3 Remote control with the software VNC
10.3.1 Activating the remote control VNC on the machine
The remote control VNC is deactivated on the knitting machine by default.
1. Call up the "Service" window.
2. Call up "Diagnosis" window.
3. Call up "Machine Management Tools" window.
4. Call up "Additional function keys".
5. Tap on "Remote control VNC" key.
The activation of the remote control VNC gets is acknowledged by a
message.
Key Function
Call up the "Service" window
Call up "Diagnostics" window
Call up "Machine Management Tools" window
Call up "Additional function keys"
Activate/deactivate "Remote control VNC"
Call up "Main menu"
Keys to activate the remote control VNC on the machine
To Next Page
Loading...
