Stoll CMS ADF-3 - Remote Control with the Software VNC

Machine Management Tools 10
Remote control with the software VNC 10.3
424
10.3 Remote control with the software VNC
You can use the remote control VNC to control a networked machine (VNC
Server) by a remote computer (VNC client) as if you were standing in front
of the machine and entering data via the touch screen.
Requirements:
 Network
 Networked and correctly configured ready-to-use machine
 Computer that serves as a client, is also networked (e.g. a note-book)
 Software VNC Viewer for the client
 Software for the client:
VNC Viewer or the Java Runtime Engine from Sun Microsystems Inc.
The VNC Viewer software for the client can for e.g. be obtained from the
following manufacturer websites:
 www.realvnc.com
 www.tightvnc.com
 www.ultravnc.sourceforge.net
The Java Runtime Engine for the client can be obtained from the
manufacturer website www.java.com.
In the following sections is described how to activate and use the remote
control VNC:
 Activating the remote control VNC on the machine [-> 425]
 Configuring the remote control VNC on the machine [-> 426]
 Determine the IP address of the machine [-> 427]
 Installing software VNC Viewer on the computer (e.g. a note-book) [->
427]
 Remote control with the VNC Viewer [-> 428]
 Remote control via a web browser [-> 430]