Stoll CMS ADF-3 - Greasing Butts of the Coupling Parts and Intermediate Sliders; Greasing the Yarn Carrier Bows

Maintenance of the knitting machine 6
Lubricate knitting machine 6.3
292
6.3.9 Greasing butts of the coupling parts and intermediate
sliders
After every tenth "Oil needle bed" note appears a "Grease needle bed"
pictograph.

Greasing the butts of the coupling part and intermediate sliders
➜ Use a brush to apply grease to the butts of the coupling parts and
intermediate sliders.
6.3.10 Greasing the yarn carrier bows
➜ Apply grease on the front and rear side of the yarn carrier bow using a
paintbrush.
: Grease carefully so that the thread does not get soiled.