179
4 Adjusting knitting machine
4.2 Advanced adjustments
4.2.15 Reference yarn carrier
During the yarn carrier reference run the autarkic yarn carriers are
synchronized. They move outwards to their limit stop, then into clamping
position above the clamping and cutting bed.
A yarn carrier reference run is necessary for example after a Restart.
1. Call up the "Service" menu from the "Main menu".
2. Call up the "Reference runs" window.
3. In the "Reference runs" window tap on the "Reference run of yarn
carriers" key.
Key Function
Call up the "Service" menu
Call up "Reference runs" window
Icon "Yarn carrier not referenced"
Icon "Yarn carrier ready to knit"
Call up "Main menu"
Keys for carrying out the reference run
To Next Page
Loading...
