Stoll CMS ADF-3 - Cycle Counters

257
5 Setup Data
5.4 Setup2 Editor
5.4.6 Cycle counters
The cycle counter specifies how often a pattern area is to be repeated.
Which cycle counter controls which pattern area is defined in the knitting
program.
Further information:
 Table Tools [-> 244]
 File tools [-> 245]
 Helpers for Input [-> 239]
 Overview of the Setup2 Editor of the CMS [-> 237]
 Setup Data [-> 233]
 Comparing Setup1 to Setup2 [-> 235]
Explanation Value range
RS1 -
RS39
Cycle counters 1 to 39 1-99999
Comment Comment ASCII Characters