Setup Data 5
Setup2 Editor 5.4
244
Switching on or off the table
tools
Table Tools
Activate/deactivate the
display of the active "Don't
Care" values
Explanation
Switch on the table tools
Switch off the table tools
Explanation
Go to row.
Select the desired line in the selection list
The cursor jumps to the desired line of the table.
: Active with more than 21 lines.
Adding a table row
Delete the selected line
Copying the values (of a line)
Inserting the copied values
Copying several lines ("Yarn Carrier", "YD/YDI" and "YC/YCI" tab)
Pasting the copied lines ("Yarn Carrier", "YD/YDI" and "YC/YCI" tab)
Explanation
Activate the display of the active "Don't Care" values
Only with the tab: WMF, W+F, YDI, YCI, VCI
Deactivate the display of the active "Don't Care" values
To Next Page
Loading...
