365
8 Software - Installation and basic settings
8 Software - Installation and
basic settings
In this chapter the description of how can one install and set the Stoll
operating system is given.
It is important thereby that one gets to know the boot process (the booting
of software and the activation of control) on the knitting machine.
One has to engage in this boot process during installation and setting of the
Stoll operating system.
Thereby call up various windows e.g. the "Basic Settings Menu" window.
For the setting of the Stoll operating system more windows are open in
which the changes can be made.
If your knitting machines are interconnected or are connected with a pattern
unit, you can configure the on-line connection.
This chapter contains information on:
Boot process [-> 366]
Saving all machine data on the USB-Memory-Stick [-> 381]
Saving pattern after a big fault [-> 382]
Installing the Stoll operating system [-> 385]
Diagnose Control [-> 408]
Save the machine data against any data losses before every
installation of Stoll operating system or before any changes
in the configuration.
To Next Page
Loading...
