Description of knitting machine 2
Yarn guide 2.2
24
2.2.1 Course of yarn
The yarn feeding is carried out from the top - directly from the yarn control
device to the yarn carrier. To prevent the threads from touching each other,
the yarn control devices are arranged in a V-shape.
In order to ensure that the course of yarn from the bobbin to the yarn carrier
runs straight, there is a fixed allocation of bobbin, yarn control device and
yarn carrier.
Bobbin 1 - Yarn control device 1 - Yarn carrier 1
Bobbin 2 - Yarn control device 2 - Yarn carrier 2, etc.
This yarn feeding causes:
the most reduced yarn tension possible
that the threads do not touch each other
To Next Page
Loading...
