Stoll CMS ADF-3 - Data Mode and File Mode

265
5 Setup Data
5.4 Setup2 Editor
5.4.10 Data Mode and File Mode
The "Setup2 Editor" of the CMS and of the M1plus differs between the
editing of Setup2 files (.setx) and of data of the loaded pattern (.mdv / .zip).
Data Mode File Mode
Origin of the data Loaded pattern Setup2 files (.setx)
Calling up By the "Pattern
Parameters" / "Setup-
Data…" menu
By the "MC-Program" /
"Display MC Program..." /
"MC-Setup..." menu
/ .setx
Save Button
"Apply"
Menu
"Save"
Effect of editing Direct in the pattern
Direct in the fabric
Modified Setup2 file
Difference in editing Restricted possibilities due
to the situation
Restricted possibilities due to
the situation
File Tools Not available Menus "File" "Edit" "?"
Not available
Title "<pattern name> -
<CMS...> - Setup2"
"Sintral Editor - <file
name>.setx"