Producing with the knitting machine 3
Eliminating errors in the fabric 3.5
98
3.5 Eliminating errors in the fabric
If the fabric piece is not to be completed properly, two options in the
"Machine start" window can be used.
This chapter contains information on:
Starting again after pressing off fabric [-> 99]
Removing fabric winding around fabric take-down [-> 104]
Key Function
Call up "Additional function keys"
The cycle currently being knitted is aborted and the other cycles will
be knitted as programmed.
The machine automatically begins with a new fabric if the following
conditions are met:
The racking device is in the home position
The yarn carriers are in starting position
The carriage direction allows beginning again.
As long as these conditions are not met, cycles will only be knitted
once.
Keys to interrupt a fabric
To Next Page
Loading...
