273
6 Maintenance of the knitting machine
6.2 Cleaning the knitting machine
6.2 Cleaning the knitting machine
To retain the operability of the knitting machine and ensure the quality of the
fabric, the knitting machine must be cleaned regularly.
We recommend the use of following cleaning agent:
Cleaning interval Cleaning work
if necessary Cleaning the touch screen
6 to 24 operating hours Cleaning suction and lint container
daily Vacuuming off knitting machine
Cleaning needle bed
Cleaning thread clamping and cutting device
Cleaning the friction feed wheel
100 operating hours Cleaning main drive fan
once a month Cleaning fan and radiators in right control unit
Cleaning filter mat of power supply unit
3 to 6 months Thoroughly cleaning needle bed
6 months Clean the knitting systems
Cleaning plan
Cleaning agent Cleaning work
Cloth, suction,
compressed air
on the entire knitting machine
Special cleaning agent
for plexiglas (note the
manufacturer's
specifications)
Touch screen and covers
Cleaning petrol (note
the manufacturer's
specifications)
Roller rubber of the take-down roller
Cleaning agent
IMPORTANT
Plastics, in particular the transparent covers, may not be
cleaned with alcohol or spirit, but instead only with a special
cleaning agent for plexiglas.
To Next Page
Loading...
