Maintenance of the knitting machine 6
Minimize wear 6.1
272
Further information:
Adjusting needle brushes [-> 171]
Yarn table [-> 417]
Lubricate knitting machine [-> 285]
Belt on auxiliary take-
down
Following a fault on the auxiliary take-down (fabric
winding device), the residual threads were not
removed carefully
Belts (drive, racking, comb
take-down, auxiliary take-
down)
Belt tension too high: Danger of bearing damage
(adjustment with measuring device by Stoll
technician)
Belt tension too low: Danger of position errors
(racking, auxiliary take-down)
Energy chain trailing cable Heavy soiling
Laying down of objects
Damage to depositing gutter
Not moved into position carefully after work at the
rear of the machine
Wearing part Possible causes of increased wear
Wearing parts
To Next Page
Loading...
