153
4 Adjusting knitting machine
4.2 Advanced adjustments
4.2.4 Setting needle bed parameters
The needle bed parameters are used to make the needle-bed-specific
settings. They serve for the fine adjustment of the needle beds. The needle
bed parameters always remain saved, even when the operating system is
read in again.
"Needle bed parameters" window
Field Data shown
1 Racking ground correction (VGK)
2 Racking position correction (VPK)
3 Shock stop motion for the front and rear needle beds and additional
needle bed.
Value range: 1-32, 1=not sensitive, 32=very sensitive
Key Function
Confirm input
Call up the "Service" menu
Call up the "Basic settings" menu
Open the "Needle bed parameters" window
Call up "Main menu"
Keys for setting the needle bed parameters
To Next Page
Loading...
