Stoll CMS ADF-3 - Producing with Knitting Orders (Order Menu); Creating and Managing Order Menu

93
3 Producing with the knitting machine
3.4 Producing with knitting orders (order menu)
3.4 Producing with knitting orders (order
menu)
This chapter contains information on:
 Creating and managing order menu [-> 93]
 Setting or changing counters for order menu [-> 95]
 Saving/loading order menu [-> 96]
3.4.1 Creating and managing order menu
Using the order menu, the various making-up sizes of an item (knitting
program) in a list are gather together and processed one after another. The
number of pieces and cycle counters are specified for each making-up size.
A knitting order (line) is processed until the number of fabrics in the "ST1"
and "ST2" columns are the same. The machine automatically switches
over to the next size and produces the set piece number. Knitting is carried
out line by line from top to bottom.

"Order menu" window
Column Data shown
1 Current order number
2 Name of the order
3 ("ST1") Number of pieces to be produced
4 ("ST2") Piece number already produced
5 to 11 Cycle counters and counters
12 ("#51") left border
13 ("#52") right border
Data in the "Order menu" window