211
4 Adjusting knitting machine
4.3 Working with files
4.3.8 Carrying out a program check
If you carried out changes in the knitting program you can have your inputs
checked. With it the knitting program will be checked for its knitting ability.
If an error is detected, an error message will be displayed in the lower area
of the window. Tapping the "?" key will display notes about the reason and
remedy of the problem.
Please note that only program errors, so-called syntax errors can be found.
Errors in the jacquard area cannot be detected.
During the program test, the pattern is displayed in the upper area and the
TP messages in the lower area. The window size of both areas can be
changed.
Call up "Program test" window:
✔ A knitting program is being loaded.
1. From the "Main menu" call up the "Editor" window.
2. Call up "additional function keys".
3. Call up the"Program Test" window.
Key Function
Call up "Main menu"
Call up "Editor" window
Call up "Additional function keys"
Call up "Program test" window
Keys for the "Program test" window
To Next Page
Loading...
