Stoll CMS ADF-3 - Page 274

Maintenance of the knitting machine 6
Cleaning the knitting machine 6.2
274
 Cleaning the touch screen [-> 275]
 Cleaning suction and fluff container [-> 276]
 Vacuuming off knitting machine [-> 278]
 Cleaning needle bed [-> 278]
 Cleaning thread clamping and cutting device [-> 279]
 Cleaning the friction feed wheel * [-> 279]
 Cleaning main drive fan [-> 280]
 Cleaning fan and radiators in right control unit [-> 280]
 Cleaning filter mat of power supply unit [-> 281]
 Thoroughly cleaning needle bed [-> 282]
 Clean the knitting systems [-> 284]
IMPORTANT
Do not remove metallic parts and fragments (e.g. broken
needle latch or needle hook) with a magnetic tool. There is a
danger that the needle bed or cams can be magnetized,
leading to incorrect selection.