Adjusting knitting machine 4
Advanced adjustments 4.2
180
The "Reference run of yarn carriers" window appears.
4. Tap on the "Reference all" key.
5. The yarn carriers are automatically referenced consecutively rail by rail.
The yarn carriers move outwards to their left or right limit stop, then
into clamping position above the clamping and cutting bed.
6. If a yarn carrier is referenced, the icon changes from "Yarn carrier not
referenced" to "Yarn carrier ready to knit".
7. After completing the yarn carrier reference run all the yarn carriers are
ready to knit.
8. The reference run is complete, the machine is ready to knit.
Call up "Main menu".
To Next Page
Loading...
