Adjusting knitting machine 4
Advanced adjustments 4.2
148
Further information:
Symbols in this document [-> 14]
Suction and cleaning row [-> 35]
4 Clean the selection systems.
Some brushes are fixed on the exterior part of the needle bed. The carriage
runs so far outwards that the brushes can clean the selection systems. This
does not interrupt ongoing knitting process.
After n courses Number of courses till the selection systems get cleaned
(1 course = 2 rows)
Carriage Direction "< >": to left and right
"<": to left only
"optimized"
The course of the carriage is being analyzed. If the
carriage runs over the brushes, e.g. when it runs
outwards to the clamping-cutting bed, then this course
and the cleaning course will be carried out together.
If the brushes are not overrun after the preset number of
carriage strokes, then a cleaning course will be carried
out.
Explanation
To Next Page
Loading...
