Stoll CMS ADF-3 - Page 115

115
4 Adjusting knitting machine
4.1 Basic settings
Staggering the yarn carriers:
1. Call up the "Yarn carrier" window.
2. Call up "Additional function keys".
3. Call up the "YC staggering" window.
4. In the "YC staggering" window call up the Setup2 editor
5. Tap on the input field that is to be edited and enter the value.
6. Confirm entries.
7. Return to the "YC staggering" window.
Key Function
Call up the "Yarn carrier" window
Call up "Additional function keys"
Call up "YC staggering" window
Call up the Setup2 Editor
Confirm entries
return to the "YC staggering" window
Keys for staggering the yarn carriers