187
4 Adjusting knitting machine
4.3 Working with files
Marking text A word or a text block is marked for being copied, moved or deleted.
1. To mark a word, tap the word twice.
2. To mark a line, tap the line three times.
3. To mark a text block, drag your finger from the starting position to the
end position.
- or -
On the 1st level of the SINTRAL editor, use both keys "Set beginning of
a marking" and "Set end of a marking".
Deactivating marking ➜ To cancel a marking, touch any spot.
Setting/deactivating write
protection
➜ If a write-protected file is loaded, the information "Write protection"
appears in the status line of the SINTRAL editor.
Entries in selection window Selection windows are open when some keys are selected. The following
entry is possible:
a text can be entered with the virtual keyboard
a selection occurs manually by tapping a key
The entries must be confirmed by the "Confirm entry" key.
Key Function
"Set Write Protection": Set write protection of the selected file
"Deactivate Write Protection": Deactivate write protection of the
selected file
"Activate write protection" and "Deactivate write protection" key
Key Function Key Function
Return to the 1st level in the
SINTRAL editor
Confirm input and run in the
SINTRAL editor
Function keys in the selection windows
To Next Page
Loading...
