231
4 Adjusting knitting machine
4.6 Defining user profile
Online commands If the knitting machine is connected with the STOLL pattern workstation, the
password and the user profile can be changed simultaneously on all the
machines with the help of the on-line connection. The condition is that the
password is written in uppercase letters.
To enter the commands on the pattern preparation unit the following steps
are necessary:
1. Activate program"Online".
2. Select the "Display call-round ->" program point in the "NET" program.
The "call-round" window appears.
3. Type in the corresponding command and confirm.
Commands Function
setuserlevel Password User profile name
Example: The password is "JOE", the user
profile is "david". The complete command is:
setuserlevel JOE david
Activate the same user profile on all
knitting machines
setulword OldPassword NewPassword
Example: The old password is "JOE", the
new one is "JOHN". The complete command
is: setulpassword JOE JOHN
Activate the same password on all
knitting machines
Commands for activating user profile and password
To Next Page
Loading...
