Stoll CMS ADF-3 - Page 418

Yarns and stitch tension 9
Yarn table 9.4
418
Further information:
 Economic production and the influencing factors [-> 411]
Gauge assembled processing
[Nm]
Final count [Nm]
16 1 x 48/2
1 x 54/2
1 x 60/2
20 - 30
18 1 x 54/2
1 x 60/2
1 x 80/2
20 - 40
20 1 x 80/2 20 - 40
2,5.2
(all needles)
3 x 28/2
2 x 14/2
3 - 4,5
2,5.2 m.4L All needles: 3 x 28/2 Nm 3 – 4,5
Every 2nd needle: 8 x 28/
2 Nm
1,3 - 2
Every 2nd needle with
cast-off technique:
maximum 13 x 28/2 Nm
1,1
2,5.2 (CMS 830 C)
(each 2nd needle)
3 x 14/2
6 x 14/2
1 - 2
2,5.2
(each 2nd needle)
3 x 14/2
4 x 14/2
1,3 - 2
3,5.2
(all needles)
2 x 28/2
3 x 28/2
4,5 - 7
3,5.2
(each 2nd needle)
3 x 14/2
7 x 28/2
1,5 - 2,5
3,5.2 m.4L All needles: 3 x 28/2 Nm 4,5 – 7
Every 2nd needle: 7 x 28/
2 Nm
1,5 – 2,5
Every 2nd needle with
cast-off technique:
maximum 9 x 28/2 Nm
1,5
Yarn table - Allocation of machine gauge and yarn thickness (Table 2)