Description of knitting machine 2
Display and operating elements 2.8
50
Please observe in position 3 1. When the covers are closed, the engaging rod is held by a magnet
(production at normal speed).
2. When the covers hoods are open (e.g. during set-up and checking
work) the engaging rod is not held by a magnet and must be held in
position 3 by hand. If the engaging rod is released, it immediately falls
into position 1 and stops the machine (dead man's switch in accordance
with EN 11 111). The maximum carriage speed with open safety doors
can be set.
Further information:
Setting machine parameters [-> 154]
DANGER
Danger by parts of needles which have broken off!
Danger of injury to eyes by parts of needles.
➜ Wear safety glasses.
To Next Page
Loading...
