Each of these system messages is also entered to the Log List. In order to be
removed from the Log List, it has to be acknowledged by the user.
To prevent the user from being annoyed with lots of warning and error mes-
sage dialog boxes, these are generated only where it is impossible to notice
function execution failure. In these cases an error message is generated if the
function execution fails completely. A warning is given to the user if a func-
tion might be executed partially only.
5.12.3 Error Messages
5.12.3.1 System
Error Code Error Type Error Text / Remarks
1000 ERROR SYSTEM, Fatal software error occurred - System will be stopped. For details see log-file.
1001 WARNING
SYSTEM, Extension ‘TalkBack.ext’ could not be started. Reason: ‘Did not find XML-File or XDR-File:
xml\TalkBack.xml’.
1002 WARNING
SYSTEM, Extension ‘UserGUI.ext’ could not load User Buttons. Reason: ‘Did not find XML-File or XDR-
File: xml\TalkBack.xml’.
1004 WARNING SYSTEM, ‘UILogic.xml’ has an incompatible XDR file. Default settings assumed.
1100 ERROR
SYSTEM, ‘Desk’ communication failure: Connection to ‘System40:Core’ lost.
1200 WARNING
SYSTEM, Number of ‘Logical Inputs’ has been truncated to ‘128’
1201 WARNING
SYSTEM, Low Memory on ‘System40:Core’.
Physical Memory available: 4.802 MB
Process Memory available: 7.802 MB.
1300 WARNING
SYSTEM, The console set-up cannot be changed, since there is at least one channel on-air. Please make
sure no channel is on-air and try again.
1301 WARNING
SYSTEM, The console set-up cannot be changed, since there is at least one remote channel (I/O sharing)
on-air. Please make sure no channel is on-air on a remote system and try again.
1302 WARNING Appears when switching to another console set-up.
1303 WARNING
SYSTEM, Please restart the ‘Desk’ to complete the set-up change.
To Next Page
Loading...
