5.12.3.5 Snapshot Handling
Error Code Error Type Error Text / Remarks
5000 WARNING
SNAPSHOT, Snapshot File
‘myFirstSnap’ not found or invalid! Snapshot not loaded.
5001 WARNING
SNAPSHOT, Snapshot recall incomplete. Audio parameters of channel
‘2’ on ‘Container100’ are pending.
Input ‘Digi1’ is on-air.
5002 WARNING
SNAPSHOT, Snapshot cannot be loaded. Incompatible snapshot file version
‘myFirstSnap’.
5003 WARNING
SNAPSHOT, Snapshot File
‘myFirstSnap’ corrupted!
5004 WARNING SNAPSHOT, Snapshot files cannot be created. Not enough memory on Core file system!
5005 WARNING SNAPSHOT, Snapshot files cannot be transferred. Not enough memory on external storage media!
5006 WARNING SNAPSHOT, Snapshot file server not properly configured. Check configuration and network connection.
5008 INFO
SNAPSHOT, Fader assignment may not be recalled correctly due to double alias while loading Input
Routing Snapshot.
5009 WARNING SNAPSHOT, Snapshot file server was shutting down or connection lost.
5010 WARNING
SNAPSHOT, To complete the software update please save the whole start-up configuration. Make sure that
all subsystems are running.
5011 WARNING
SNAPSHOT, Initial Snapshot file ‘c10_initial.iss’ can not be created on the ‘CORE’. Error code 3.
5012 WARNING
SNAPSHOT, Initial Snapshot file ‘c10_initial.iss ‘ can not be created on the ‘CORE ‘. The folder
‘snapshots’ doesn’t exist.
5013 WARNING
SNAPSHOT, Initial Snapshot file ‘c10_initial.iss’ can not be transferred to the ‘CORE’. Not enough
memory!
5014 WARNING
SNAPSHOT, Couldn’t transfer Initial Snapshot file ‘c10_initial.iss’ to the ‘CORE’. Write file failed.
5015 WARNING
SNAPSHOT, Couldn’t transfer Initial Snapshot file ‘c10_initial.iss’ to the ‘CORE’. Read file failed.
5016 WARNING
SNAPSHOT, Snapshot cannot be loaded. Incompatible product identification ‘OnAir3000’ in snapshot
‘myFirstSnap’.
5017 WARNING SNAPSHOT, Snapshot cannot be loaded. Unknown product identification in snapshot ‘myFirstSnap’.
5.12.3.6 Routing
Error Code Error Type Error Text / Remarks
6000 WARNING
Routing failure. The routing of channel
‘2’ on ‘Container100’ could not be changed. Channel ‘2’ on
‘Container100’ is virtual.
6001 WARNING
Pending Routing. The routing of channel
‘2’ on ‘Container100’ is not yet changed. Input ‘Digi1’ is on-air.
6002 WARNING
Routing failure. The routing of channel
‘2’ on ‘Container100’ could not be changed. Channel ‘1’ on
‘Container100’ is locked.
6003 WARNING
Routing failure. Inexistent Input (#17) cannot be assigned to channel. No Input assigned to channel ‘2’ on
‘Container100’.
6004 WARNING
Routing failure. Not enough DSP channels.
Input “DVD 5.1” cannot be assigned to channel 2 on Container100.
6102 WARNING
Routing failure. The source of output
‘PRG Out’ on ‘Container100’ could not be changed. The output is
locked.
5.12.3.7 External Memory Device Handling
Error Code Error Type Error Text / Remarks
7000 WARNING External media, Cannot read media. Unidentified Format!
To Next Page
Loading...
Need help?
General
