OnAir 2500 Digital Mixing Console
Operation 5-57
Date printed: 18.07.08
SW V3.0
5.7.5 Snapshot/Memory Device Operation Details
For general snapshot and memory device operation, please refer to chapter
5.3.7.2.
The available snapshot operations depend on the current selection within the
local snapshot and the memory device snapshot lists:
Selected Item
<< >>
in Local List in Ext. List
Global
Any User Name
– –
Any Global Snapshot
–
Copies the selected snapshot into the selected user’s
folder (only if the own user name is selected)
User Name
– –
Default
– –
The Default Snapshot
–
Copies the selected snapshot into the selected user’s
folder (only if the own user name is selected)
Private
– –
Any Private Snapshot
–
Copies the selected snapshot into the selected user’s
folder (only if the own user name is selected)
Global
Any Snapshot
Copies the selected snapshot
from the memory device to the
local file system as a global
snapshot (administrator only)
–
Any Global Snapshot
Overwrites the selected local
snapshot with the snapshot se-
lected from the memory device
(administrator only)
Overwrites the snapshot selected on the memory
device with the selected local snapshot (either for
the administrator, or if one of the current user’s own
snapshots is selected)
User Name
– –
Default
Overwrites the local default snap-
shot with the snapshot selected
from the memory device
–
The Default Snapshot
Overwrites the local default snap-
shot with the snapshot selected
from the memory device
Overwrites the snapshot selected on the memory
device with the selected local snapshot (either for
the administrator, or if one of the current user’s own
snapshots is selected)
Private
Copies the selected snapshot
from the memory device to the
local file system as a private
snapshot
–
Any Private Snapshot
Overwrites the selected local
snapshot with the snapshot se-
lected from the memory device
Overwrites the snapshot selected on the memory
device with the selected local snapshot (either for
the administrator, or if one of the current user’s own
snapshots is selected)
The << and >> buttons are only visible if an operation is allowed.
<< or >> (“Copy“) Copies all available snapshot parameter files with the same name
to the destination.
If there already exists a snapshot with the same, a user warning appears in a
modal dialog: “Snapshot ‘name’ already exists. Do you really want
to overwrite it?” When answering Yes, all selected parameter files will be
overwritten.
<< or >> (“Overwrite“) Updates the selected snapshot parameters within the selected
snapshot. Un-selected parameter files remain unchanged.
To Next Page
Loading...
