Studer OnAir 2500 - SP SRC (Desk Speaker Source)

OnAir 2500/OnAir 3000 Digital Mixing Consoles
6-50 Conguration
Date printed: 22.07.08
SW V3.0
OnAir 2500/OnAir 3000 Digital Mixing Consoles
Conguration 6-51
Date printed: 22.07.08
SW V3.0
6.5.22.3 SP SRC
SP Source Selector CR/ST1 The list of sources for the PFL/TB speaker (SP) that can be selected with
the SELECT rotary encoder on the CR (control room) and ST1 (studio 1)
monitoring/talkback modules is dened here (for details see chapters 5.5.1
and 5.5.2).
When touching the corresponding eld, a selection menu appears that can
be scrolled up and down with the navigation buttons at its upper and lower
margins, or with the rightmost rotary encoder. In this menu all possible entries
are listed, together with MOVE UP, MOVE DOWN, and DELETE buttons
for editing.
All router inputs and outputs may be selected here for monitoring purposes.
OnAir 2500: Studio 1 not supported.
CLEAR ALL The top left CLEAR ALL eld is colored somewhat brighter than the others; it
can be used to clear all congured monitoring sources at once. If it is touched,
clearing the sources has to be conrmed in a dialog box.
In case that all congured sources should have been cleared inadvertently,
and the current conguration has not been saved yet, they can be restored by
touching the Undo button, as mentioned in chapter 6.4.2.