4.5 Central Section
The larger keys in this module have transparent snap-on caps for convenient
labeling.
4.5.1 Rotary Assign Keys
Each of the twelve upper keys of the 24 keys in this block is dedicated to
assign a function to the rotary encoders and their adjacent and keys in
the fader modules. The functions of the and keys depend on the selected
parameter and can be, e.g., AUX functions, such as AF/PF switchover ( ),
or On/Off or Enter ( ).
F1...F5 In the lower key block the function keys F1...F5 can be used to access external
functions via GPIO (e.g. red/green light, tape remote control, door control,
ring tone, etc.), according to the user’s requirements. For configuration refer
to chapter 6.5.26.
SNAP 1...SNAP6 These six keys are used to recall the global snapshots SK 1...SK 6. They
have to be pressed while ENABLE is held. These keys can also be doubled
by external keys connected via GPIO.For configuration and details refer to
chapter 6.5.32.3.
To Next Page
Loading...
