Studer OnAir 2500 - Snapshot Keys

OnAir 2500/OnAir 3000 Digital Mixing Consoles
6-80 Conguration
Date printed: 22.07.08
SW V3.0
OnAir 2500/OnAir 3000 Digital Mixing Consoles
Conguration 6-81
Date printed: 22.07.08
SW V3.0
6.5.32.3 Snapshot Keys
OnAir 2500: By default, the OnAir 2500 desk has six snapshot keys SK1 to SK6 available.
These are used to recall the six global snapshots SK1 to SK6 contained in
the factory conguration. At time of delivery they are identical with the initial
snapshot but can be modied by the administrator.
These snapshots can be recalled by any user when holding the ENABLE key,
then pressing one of the SK1 to SK6 keys; they may, of course, also be recalled
from the central touch screen’s Snapshot page as usual. For OnAir 2500
consoles the LocationFilter parameter must always be set to Off.
Global Snapshot Recall via GPI Global snapshots may also be recalled via GPI. To do so, congure the cor-
responding GPI input pins as shown in the screenshot below.
For more information on the GPI conguration refer to chapter 6.5.26.1.