Last Snapshot Indication via GPO The last recalled global snapshot may also be communicated via GPO; GPO
configuration is identical with the GPI configuration given above, except
that the Function Type must be LastSnapshot, and there exists no Action
item.
OnAir 3000 The same applies as mentioned above for OnAir 2500 consoles.
In addition, denition of any desk key as a snapshot key is possible via the
corresponding XML le; up to 80 snapshot keys are possible if this should
be required.
Split desk congurations usually have individual snapshots and snapshot keys
for every desk, so the LocationFilter parameters must be set accordingly.
6.5.32.4 Settings
This page is used to set the size of the AutoTakeoverWindows (1...5); for
normal operation, the default setting of 3 is recommended.
In case of problems with the fader touch sensor it can be deactivated here by
setting Disable FaderTouch to On (this is the normal setting if no optional
motor fader modules are installed).
To Next Page
Loading...
Need help?
General
