Studer OnAir 2500 - CR and Studio1 Monitoring Outputs; Patch Inputs; Strip Assignment; Talkback Inputs

OnAir 2500/OnAir 3000 Digital Mixing Consoles
6-4 Conguration
Date printed: 22.07.08
SW V3.0
OnAir 2500/OnAir 3000 Digital Mixing Consoles
Conguration 6-5
Date printed: 22.07.08
SW V3.0
6.1.1.2 Talkback Inputs (Studio1 supported by OnAir 3000 only)
The rst mono input signal of the rst ADAT I/O card is mapped to the CRMic
1 talkback input. If this ADAT card supports 16 channels, then its 9
th
input is
mapped to the TB from Studio 1-1 input. Otherwise, and if a second ADAT
I/O card is available in the system, the rst mono input signal of the second
ADAT card is mapped to the TB from Studio 1-1 input.
6.1.1.3 Patch Inputs (supported by OnAir 3000 only)
Patch inputs are not initialized by AutoCong, even if there are not sufcient
logical inputs available for assigning all physical inputs.
6.1.1.4 Strip Assignment
The strip assignment is not part of the conguration. It may be changed by
the user in the Routing - Input page; its parameters will not be touched by
AutoCong. The Cong extension will by default assign logical inputs to all
the strip channels in ascending order.
6.1.1.5 CR and Studio1 Monitoring Outputs (Studio1 supported by OnAir 3000 only)
The rst 8 signals of the rst ADAT I/O card (if available) are mapped to the
xed outputs as follows:
Signal # Signal Output Type
1
CR PFL speaker (mono)
Fixed Mono
2
3
4
CR DJ phones left
CR DJ phones right
Fixed Stereo
5
6
CR guest phones left
CR guest phones right
Fixed Stereo
7
8
CR near-eld speaker left (if 5.1 option
enabled), otherwise CR speaker left
CR near-eld speaker right (if 5.1 option
enabled), otherwise CR speaker right
Fixed Stereo
If the rst ADAT I/O card supports 16 channels, the second 8 signals of the
rst ADAT I/O card (if available) are mapped to the xed outputs indicated
below; otherwise, the rst 8 signals of the second ADAT I/O are mapped to
the xed outputs as follows:
Signal # Signal Output Type
9 (1)
Studio 1 PFL speaker (mono)
Fixed Mono
10 (2)
11 (3)
12 (4)
Studio 1 DJ phones left
Studio 1 DJ phones right
Fixed Stereo
13 (5)
14 (6)
Studio 1 guest phones left
Studio 1 guest phones right
Fixed Stereo
15 (7)
16 (8)
Studio 1 near-eld speaker left (if 5.1
option enabled), otherwise CR speaker left
Studio 1 near-eld speaker right (if 5.1
option enabled), otherwise CR spkr right
Fixed Stereo