5.3.8.4 (Admin) Date Time Page
As long as no external time reference signal is configured, the internal clock
is used as time reference, the Time Sync Reference indication is None,
and the sync indicator in the upper left corner of the clock dial is gray. To
set the system date or time, touch the corresponding Set Date or Set Time
button. The current settings are indicated in the Day/Month/Year or Hours/
Minutes/Seconds fields; adjust with the rotary encoders below the fields.
To save the new settings, touch Apply.
If an external time reference signal is selected (requires an NTP time signal,
configuration in chapter 6.5.15), the Set Date and Set Time buttons disap-
pear. If the external time reference is active, the sync indicator is white on
black background, as shown below; if not, the sync indicator turns red.
If you need the screen clock to temporarily display a time different from the
internal system time in free-running mode (i.e. Time Sync Reference =
To Next Page
Loading...
