ChannelOn follows FaderOpen If active, this function automatically switches a channel ON while its fader
is open. Selections: On or Off.
Gen. off for on-air channels If set to On, this function disables the GEN button on the channel pages for
all channels currently being on-air.
Reset Timer On Fader Close If set to On, cumulative time measurement is selected for the input fader
stopwatches; a running stopwatch is stopped by switching the channel OFF;
it is reset only when the fader is closed. Also refer to chapter 5.9.3.
Channel TB Selections: Nothing, or TB Off on Channel Active. If TB Off on Chan-
nel Active is selected, talkback to a channel currently being active is inhib-
ited.
5.1 to Stereo Mixdown... Sets the contribution level of surround and center channels for the internal
stereo downmix, as well as the overall level.
Surround Level Adjustable in steps of 1 dB between 0 and –10 dB; default setting: –3 dB.
Center Level Adjustable in steps of 1 dB between 0 and –10 dB; default setting: –3 dB.
Trim Level Adjustable in steps of 1 dB between 0 and –10 dB; default setting: 0 dB.
OnAir 2500: 5.1-channel outputs not supported.
Available Meter Scales:
PPM DIN Nordic analog Nordic digital
To Next Page
Loading...
Need help?
General
