Studer OnAir 2500 - Page 177

OnAir 2500/OnAir 3000 Digital Mixing Consoles
6-42 Conguration
Date printed: 22.07.08
SW V3.0
OnAir 2500/OnAir 3000 Digital Mixing Consoles
Conguration 6-43
Date printed: 22.07.08
SW V3.0
The label of the specied Net Source is copied to the Net Input, and audio will
be connected immediately. If there is any problem connecting to the source
system, the label indicates an asterisk (*), as shown below.
To save this Net Input denition, touch the Save IO Sharing button.
To release a Net Input, remove the existing allocation to the Net Source of the
neighboring system. Select a Net Input and clear its Net Source parameter
by touching the “-” eld.
If the specied Net Input is currently in use, it cannot be released, and a user
message is displayed.
Note: As can be seen on the previous page, not only logical inputs may be selected
as Net inputs, but also external monitoring sources, external PFLs, master
outputs, and monitor sends.