Studer OnAir 2500 - Page 197

OnAir 2500/OnAir 3000 Digital Mixing Consoles
6-62 Conguration
Date printed: 22.07.08
SW V3.0
OnAir 2500/OnAir 3000 Digital Mixing Consoles
Conguration 6-63
Date printed: 22.07.08
SW V3.0
Example 4, Pulse Output Mode: To get a pulse at the output pin, the “Triggered Edge” attribute must be set
to either “rising” or “falling”, the “Time” attribute (> 0 ms) denes the pulse
duration.
Level
Output
Pin
Level
Output
Pin
Pin Attributes Setting Pin Attributes Setting
Activate
On
Activate
On
Time
> 0 ms
Time
> 0 ms
Polarity
positive
Polarity
negative
Triggered Edge
rising
Triggered Edge
rising
Level
Output
Pin
Level
Output
Pin
Pin Attributes Setting Pin Attributes Setting
Activate
On
Activate
On
Time
> 0 ms
Time
> 0 ms
Polarity
positive
Polarity
negative
Triggered Edge
falling
Triggered Edge
falling
Key Conguration Examples: The OnAir 2500’s F 1...F 5 keys are normally used to control GPOs. This is
congured as follows:
A SNAP 1...SNAP 6 key configuration example is given in chapter 6.5.32.3.