OnAir 2500 Digital Mixing Console
Operation 5-17
Date printed: 18.07.08
SW V3.0
PAN or Balance Depending on the current channel format, this is a panorama (mono), or
balance (stereo) function. The PAN or Balance value is indicated by the
yellow-colored bar graph. The exact value is displayed as a numerical value
followed by L or R and can be set with the rotary encoder below the field in
a range from 30L (fully left) over 0 (center) to 30R (fully right). The ON
button above the bar graph is highlighted if PAN or Balance is currently
active.
Assignment Using these buttons the channel can be assigned to the main output buses.
To Next Page
Loading...
