01/02
6-63
8825/8830 Printer
General Procedures
TAG: 25
CLASS: M
USE:
MFG SERIAL NUMBERS: Cut in 4/21/99: 101K40580/101K40570/105K18270/
160K54570
7YG-90999 Through 7YG-910003
DT9-031032, 031033, 031035, 031036, 031037
8YG-065142; T5R-030359; T4R-112-047751-6;
DU0-112-059620-5
NAME: 8825/8830 AC/DC Power Distribution Changes
PURPOSE: Consists of: DC Power Harness, DC Power Module, 10 Volt Power Supply, Cir-
cuit Breaker replacement for current Ground Fault Indicator, Driver PWB.
KIT NUMBER:
REFERENCE:
TAG: 26
CLASS: O
USE: All
MFG SERIAL NUMBERS: US-8YG064000/2/5/6/7 & 8YG064048
Cut-in: 11/17/98 133K19970
DUO-059110 Through DUO-059114
T5R-030065; T4R-112-047534-3; DT9-030282;
8YG-064107; 7YG-909551-2
NAME: Firmware Version 01.07.00-16
PURPOSE:
KIT NUMBER: U.S - 600K59938 E.O - 600K59958
REFERENCE:
TAG: 27
CLASS: O
USE: All
MFG SERIAL NUMBERS: Cut-in: 4/22/99 - 160K63940
DT9-031050 - DT9031054
8YG-065142; T5R-030359; T4R-112047751-6,
DU0-112-059620-5
NAME: New IOT Control PWB
PURPOSE: Change in IOT Control PWB design replaces EPROMS with Flash ROM.
Enables Controller IOT firmware upgrades.
KIT NUMBER: U.S - 600K75320
REFERENCE:
TAG: 28
CLASS: O
USE: All
MFG SERIAL NUMBERS: Cut-in: 5/21/99 62K7893
DT9-031264 Through DT9-031267
8YG-065294; 7YG-910059-1; T4R-112-047928-4;
DU0-112-059668-0
NAME: New Image Module Assembly
PURPOSE: Removal of RS 422 board enables downward compatibility by removing the
connector PWB and replacing it with the RS422 PWB from the existing bar.
(Tag 28 on machine without the RS422 PWB.)
KIT NUMBER: U.S - 600K58761
REFERENCE:
TAG: 29
CLASS:
USE: All
MFG SERIAL NUMBERS: 8YG061364 to 367
NAME: Common AC CHassis and new design GFI
PURPOSE: Improved Performance
KIT NUMBER:
REFERENCE:
To Next Page
Loading...
Need help?
General