YASKAWA GA700 - Page 663

Parameter List
10
10.22 Parameters Changed by PM Motor Code Selection
YASKAWA ELECTRIC SIEP C710617 05F YASKAWA AC Drive GA700 Technical Manual 663
No. Name Unit Motor Code (setting value of E5-01)
E5-03
PM Motor Rated
Current (FLA)
A 26.4 34.2 38.8 52.2 65.4 77.6 99.3 130.2
E5-04
PM Motor Pole
Count
- 6 6 6 6 6 6 6 6
E5-05
PM Motor
Resistance (ohms/
phase)
Ω 0.275 0.196 0.160 0.120 0.077 0.052 0.036 0.023
E5-06
PM d-axis
Inductance (mH/
phase)
mH 9.99 7.92 6.82 5.24 3.57 2.98 1.59 1.59
E5-07
PM q-axis
Inductance (mH/
phase)
mH 12.37 9.64 8.51 6.44 4.65 3.75 2.78 1.97
E5-09
PM Back-EMF
Vpeak (mV/(rad/
s))
mVs/rad 505.3 489.2 509.5 566.2 531.6 530.6 515.2 515.2
E5-24
PM Motor
Induced Voltage
Constant 2 (Ke)
mV/(r/
min)
0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
E1-04
Maximum Output
Frequency
Hz 87.5 87.5 87.5 87.5 87.5 87.5 87.5 87.5
E1-05
Maximum Output
Voltage
V 380.0 380.0 380.0 380.0 380.0 380.0 380.0 380.0
E1-06 Base Frequency Hz 87.5 87.5 87.5 87.5 87.5 87.5 87.5 87.5
E1-09
Minimum Output
Frequency
Hz 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4
C5-17 Motor Inertia kgm
2
0.044 0.054 0.063 0.113 0.137 0.252 0.30 0.41
L3-24
*1
Motor Accel Time
for Inertia Cal
s 0.099 0.098 0.096 0.126 0.124 0.188 0.186 0.184
n5-02
Motor
Acceleration Time
s 0.099 0.098 0.096 0.126 0.124 0.188 0.186 0.184
n8-49
d-Axis Cur
forHighEfficiency
Cont
% -15.1 -14.3 -15.3 -11.3 -14.5 -13.2 -22.6 -11.9
*1 Default settings vary depending on the setting of o2-04 (Drive Model Selection).
Table 10.25 SST4 Series Motor Code Setting for Specification of 400 V at 1750 min
-1
(r/min)
No. Name Unit Motor Code (setting value of E5-01)
E5-01
PM Motor Code
Selection
- 2247 2248 2249 224A 224C 224D 224E
Voltage Class V 400 400 400 400 400 400 400
Capacity kW 90 110 132 160 200 220 300
Motor Rotation
Speed
min
-1
1750 1750 1750 1750 1750 1750 1750
E5-02
PM Motor Rated
Power (kW)
kW 90.00 110.00 132.00 160.00 200.00 250.00 300.00
E5-03
PM Motor Rated
Current (FLA)
A 153.1 184.4 229.2 269.8 346.9 421.9 520.8
E5-04
PM Motor Pole
Count
- 6 6 6 6 6 6 6
E5-05
PM Motor
Resistance (ohms/
phase)
Ω 0.019 0.017 0.012 0.008 0.005 0.004 0.002
E5-06
PM d-axis
Inductance (mH/
phase)
mH 1.51 1.43 1.13 0.96 0.65 0.67 0.40