44
Compatible SCPI Commands
SCPI Summary Table
CALCulate<1|2>:MARKer<1...4>:FUNCtion:N
OISe[:STATe] ON|OFF
FSE/FSP/FSU Yes
CALCulate<1|2>:MARKer<1...4>:FUNCtion:N
OISe:RESult?
FSE/FSP/FSU Yes
CALCulate<1|2>:MARKer<1...4>:FUNCtion:PO
Wer:SELect ACPower | CPOWer | MCACpower |
OBANdwidth | OBWidth | CN | CN0
FSE/FSP/FSU Yes Support ACPower,
MCACPower, CPOWer,
OBANdwidth and
OBWidth.
CALCulate<1|2>:MARKer<1...4>:FUNCtion:PO
Wer:RESult? ACPower | CPOWer | MCACpower
| OBANdwidth | OBWidth | CN | CN0
FSE/FSP/FSU Yes Support ACPower,
MCACPower, CPOWer,
OBANdwidth and
OBWidth.
CALCulate:STATistics:APD[:STATe] ON | OFF FSP/FSU Accepted
CALCulate:STATistics:CCDF[:STATe] ON | OFF FSP/FSU Yes
CALCulate:STATistics:CCDF:X<1 to 3>? P0_01
| P0_1 | P1 | P10
FSU Yes
CALCulate:STATistics:NSAMples 100 to 1E9 FSP/FSU Yes Min = 1000
CALCulate:STATistics:SCALe:AUTO ONCE FSP/FSU Accepted
CALCulate:STATistics:SCALe:X:RLEVel
–130dBm to 30dBm
FSP/FSU Accepted
CALCulate:STATistics:SCALe:X:RANGe 10dB
to 200dB
FSP/FSU Accepted
CALCulate:STATistics:SCALe:Y:UPPer 1E–8 to
1.0
FSP/FSU Accepted
CALCulate:STATistics:SCALe:Y:LOWer 1E–9 to
0.1
FSP/FSU Accepted
CALCulate:STATistics:PRESet FSP/FSU Accepted
CALCulate:STATistics:RESult<1 to 3>? MEAN |
PEAK | CFACtor | ALL
FSP/FSU Yes
CALCulate<1|2>:DLINe<1|2>
MINimum…MAXimum
FSE/FSP/FSU Accepted
CALCulate<1|2>:DLINe<1|2>:STATe ON | OFF FSE/FSP/FSU Yes
CALCulate<1|2>:THReshold MINimum to
MAXimum (depending on current unit)
FSE/FSP/FSU Yes
CALCulate<1|2>:THReshold:STATe ON | OFF FSE/FSP/FSU Yes
Table 3-1 SCPI Commands Summary Table
SCPI Command Corresponding
Model
Support Notes
To Next Page
Loading...
