46
Compatible SCPI Commands
SCPI Summary Table
DISPlay[:WINDow<1|2>]:TRACe<1 to
3>:Y[:SCALe] 10dB to 200dB
FSE/FSP/FSU Yes
DISPlay[:WINDow<1|2>]:TRACe<1 to
3>:Y[:SCALe]:MODE ABSolute | RELativ
FSE/FSP/FSU Accepted
DISPlay[:WINDow<1|2>]:TRACe<1 to
3>:Y[:SCALe]:RLEVel
FSE/FSP Yes
DISPlay[:WINDow<1|2>]:TRACe<1 to
3>:Y[:SCALe]:RLEVel:OFFSet
FSE/FSP/FSU Yes
DISPlay[:WINDow<1|2>]:TRACe<1 to
3>:Y[:SCALe]:PDIVision
FSE/FSP/FSU Yes The only unit supported is
DB.
DISPlay[:WINDow<1|2>]:TRACe<1 to
3>:Y:SPACing LINear | LOGarithmic| LDB
FSE/FSP/FSU Yes Do not support the
parameter option LDB.
DISPlay[:WINDow<1|2>]:TRACe<1 to
3>:MODE WRITe | VIEW | AVERage |
MAXHold | MINHold
FSE/FSP/FSU Yes
DISPlay[:WINDow<1|2>]:TRACe<1 to
3>[:STATe] ON | OFF
FSE/FSP/FSU Yes
FORMat[:DATA] FSE/FSP/FSU Yes The supported formats are
X-Series specific:
ASC,8
REAL,32
REAL,64
and INT,32
HCOPy:ABORt FSE/FSP/FSU Yes HCOPy functions are not
supported, except
HCOPY:ABORt and
HCOPY[:IMMediate].
HCOPy:CMAP<1 to 26>:DEFault1|2|3 FSP/FSU Accepted All the printer setting
commands are accepted,
but take no action.
HCOPy:CMAP<1 to 26>:HSL
<hue>,<sat>,<lum>
FSP/FSU Accepted
HCOPy:CMAP<1 to 26>:PDEFined BLACk |
BLUE | BROWn | GREen | CYAN | RED |
MAGenta | YELLow | WHITe | DGRAy | LGRAy
| LBLUe | LGREen | LCYan | LRED | LMAGenta
FSP/FSU Accepted
HCOPy:DESTination<1|2> <string> FSE/FSP/FSU Accepted
HCOPy:DEVice:COLor ON|OFF FSE/FSP/FSU Accepted
Table 3-1 SCPI Commands Summary Table
SCPI Command Corresponding
Model
Support Notes
To Next Page
Loading...
