ASTRO VG-871 - LACP4 [20 H 3 BH]: ACP Data Acquisition

86
2.28 LACP4 [20H 3BH]: ACP data acquisition
Function: This command gets the ACP data of the program whose number has been
designated. When the program number is 0, it reads out the data from the
buffer RAM. When the program has any number from 1001 to 2000, the
command reads out the data from the fixed data. When the program
number is 9999, the command reads the data from the command work
RAM.
Sequence: Type 3
Command:
STX
1 byte
02H
VG4CMD
1 byte
FDH
LACP4
2 bytes
20H 39H
Program number
1 to 4 bytes
“0” to “2000”, “9999”
ETX
1 byte
03H
Fig. 2-28-1
Data:
STX
1 byte
02H
TRDT
1 byte
10H
ACP On
1 byte
“0” = Off, “1” = On
,
1 byte
2CH (Delimiter)
ISRC1 On
1 byte
“0” = Off, “1” = On
,
1 byte
2CH (Delimiter)
ISRC2 On
1 byte
“0” = Off, “1” = On
,
1 byte
2CH (Delimiter)
ACP Type
1 byte
“0” to “3”
,
1 byte
2CH (Delimiter)
DVD-Audio Type
1 byte
“0” or “1”
,
1 byte
2CH (Delimiter)
Copy Permission
1 byte
“0” to “3”
,
1 byte
2CH (Delimiter)
Copy Number
1 byte
“0” to “7”
,
1 byte
2CH (Delimiter)
Quality
1 byte
“0” to “3”
,
1 byte
2CH (Delimiter)
Transaction
1 byte
“0” or “1”
,
1 byte
2CH (Delimiter)
ISRC1 Cont
1 byte
“0” or “1”
,
1 byte
2CH (Delimiter)
ISRC1 Valid
1 byte
“0” or “1”
,
1 byte
2CH (Delimiter)
ISRC1 Status
1 byte
“0” to “2”
,
1 byte
2CH (Delimiter)
ISRC1 Validity Info.
1 byte
“0” to “3”
,
1 byte
2CH (Delimiter)
ISRC1 Catalogue code
13 bytes
“0000000000000” to “9999999999999”
,
1 byte
2CH (Delimiter)
ISRC1 Country code
2 bytes
“00” to “ZZ”
,
1 byte
2CH (Delimiter)
ISRC1 First owner code
3 bytes
“000” to “ZZZ”
,
1 byte
2CH (Delimiter)
Year of recording code
2 bytes
“00” to “99”
,
1 byte
2CH (Delimiter)