Chapter 2 INDIVIDUAL FORMATS FOR VG CONTROL COMMANDS
2.133 LCON4 [20H BCH] : Output terminal acquisition
Function : This command gets Output terminal data of the indicated program No. In case
program NO.1001 to 2000, the VG original data is read out. In case ,NO.9999, the
data is read out from command work RAM.
Sequence : TYPE 3
Parameter :
Fig. 2.133-1
Data :
Output terminal information
#1
Output terminal information
#2
Output terminal information
#N
Fig. 2.133-2
ACK or
STX+ESTS+Error Code+ETX
To Next Page
Loading...
