ASTRO VG-871 - G8 COLOR [EAH]: Color Mode Setting

458
5.23 G8COLOR [EAH]: Color mode setting
Function : This command sets the display colors on the color bar plane (8-bit plane). The color mode
is designated by the parameters.
Sequence : Type 2
Parameter :
STX
1 byte
02H
G8COLOR
1 byte
EAH
Color mode
1 byte
“0” = Gray mode with 256 gradations
“1” = 256-color mode
ETX
1 byte
03H
Fig. 5-23-1