ASTRO VG-871 - SGADR [F3 H]: Gateway IP Address Registration

414
4.65 SGADR [F3H]: Gateway IP address registration
Function: This command sends the IP address of the gateway. (In the VG-848 series,
even its setting is registered, it will not function.)
Sequence: Type 2
Parameters:
STX
1 byte
02H
SGADR
1 byte
F3H
IP address
8 bytes
ASCII code (Hex)
Example: 192.168.0.10 → “C0A8000A”
ETX
1 byte
03H
Fig. 4-65-1
Data: None