2.109 LTPKEY4 [20H 9CH] : Key information of Timing and
Pattern data readout
Function: This command reads the Key information of Timing and Pattern data of the indicated
program. In case, program No.0, the data is read out from buffer RAM. In case ,
No.2001-2010, the data is read out from the Internal memory. In case, NO.9999, the
data is read out from the command work RAM.
Sequence: Type 3
Command ：
"1"-"1000","2001"-"2010","9999"
Fig 2-109-1
Data :
Fig 2-109-2
This command is only for VG-881.
ACK or
STX+ESTS+ERROR CODE+ETX
To Next Page
